K36 energy storage ersion 220V-50Hz 300W high power outdoor portable self-driving camping energy storage mobile power supply

Battery Rated Energy:345Wh  3.2V  108000mAh

input charging power:DC 15V/3A

AC inverter output:220V-50Hz 300W

DC output:9V-12V/15A MAX

USB output:5V/1A 5V/2A

rated power:300W

size:240*120*130mm

weight:4.3KG

Working temperature:-20℃-60℃

working environment humidity:5%-90%

Storage temperature:-10℃-55℃

Application: Applicable to vehicle-mounted electronic appliances/vehicle air pump tools, etc.

Thank you for purchasing the Xiaonengren multifunctional portable energy storage power supply. Before using the power supply, please read the contents of the manual carefully.
Charge this product with the original power adapter

1. Select the original power adapter and connect its connector to the corresponding input port of the product;

2. Connect the power adapter to the 220V power strip port, and the power indicator light on the digital display will start to flash, which means it is charging in place.
Charge the digital adapter

1. Select the original charging cable of the digital product, connect one end to the digital product, connect the other end to the output port, and then turn on the USB/DC switch

2. Check whether the power of the electrical equipment matches the output power of this product; press the ON/OFF switch to turn on the 220V power supply, the indicator light is on, and the electrical equipment is powered; the display will display the current power.
Low battery alarm
When the power is lower than 10%, it enters the low battery alarm, and the display/light starts to flash. When the device is charging, it will flash until it is out of power. When there is no device charging, it will flash for about 5 seconds and then go out.
other
When the inverter function cannot be used, please turn off the inverter light in time to save power.

Precautions
1. Before using this product, be sure to read the product manual in detail, and operate it correctly according to the instructions in the manual.

2. Do not disassemble the device by yourself. This product does not install any parts that can be disassembled/maintained by yourself.

3. It is strictly forbidden to keep the product in contact with objects or heat sources above 55°C. It is strictly forbidden to throw this product into fire or water, and it is strictly forbidden to charge the mobile power supply in an environment below 0°C.

4. Do not vibrate, knock, or hit this product vigorously. If the product encounters a strong collision, strong extrusion, or falls from a height of more than 1 meter, the shell is deformed, or bulged, please stop using this product.

5. Do not expose this product to sunlight, do not place this product in an environment with corrosive substances, and do not use other chemical solutions to clean this product.

6. When the car is charging the product, it is recommended to start the car before charging.

7. Please stop using the product immediately if it becomes abnormally hot or liquid flows out. If the liquid accidentally splashes into the eyes, do not rub the eyes, wash the eyes with clean water immediately, and seek medical attention immediately in severe cases.

8. In order to avoid abnormality of this product, it is recommended to use the charging cable, adapter and power supply device produced by the original factory.

9. Please dispose of waste mobile power according to the national environmental protection regulations

10. Keep this product out of reach of children.

Sincerely thank you for purchasing and using our product, this product has passed strict quality inspection, please use it with confidence.